Modularer Schutz Raumteiler FRAME XXL: Room Divider Setup Guide
By koziol | Published: 2026-11-01
Category: How-to Guides
Learn how to set up the FRAME XXL modular room divider set for open plan living, reception desks, and checkout areas with a simple step-by-step placement process.
Quick answer
Set up the FRAME XXL modular room divider set by first measuring the gap you need to close, then arranging the four panels in a straight or angled line before checking stability and sightlines. Place panels where a 1.5-meter distance is no longer practical, such as checkout counters or reception desks.
Why placement matters more than panel count
The FRAME XXL set gives you four transparent panels, but the setup only works if you place them where people actually pass and pause. In open plan living, that usually means between a seating zone and a walkway; at a reception, it means between staff and visitors. Transparent panels reduce infection possibilities without blocking the view, so you can keep an eye on the room while creating a physical barrier.
A common mistake is treating the divider as a decorative screen. If you leave gaps at the ends or place panels too far back from the counter edge, people can simply step around them. The panels need to sit in the direct line of approach, not off to the side.
When the FRAME XXL set is the right choice
This set suits temporary or semi-permanent separation where you need a quick, pragmatic solution rather than a built-in wall. It is not a substitute for structural glass or full-height partitions, and the catalog does not specify panel dimensions or material thickness, so check the product page for exact measurements before ordering if size is critical.
Because the panels are freestanding, they work best on level floors and in areas where they will not be knocked repeatedly. If your space has heavy foot traffic or children running through, plan the layout so the panels sit slightly out of the main path.
How to set up your FRAME XXL room divider
- Measure the gap and mark the line: Use a tape measure to find the width you need to cover, then mark the floor with painter's tape along the line where the panels will stand. Check that the line sits directly between the people who need separating, not behind the counter or off to one side. Common mistake: measuring only the counter width and forgetting the approach path, which leaves an easy way around the panels. Confirm the marked line blocks the natural walking route before you unpack the panels.
- Lay out all four panels before standing them up: Unfold or unbox the full set and arrange the panels flat on the floor in your planned order, whether straight, L-shaped, or zigzag. This lets you see the total footprint and adjust spacing before anything is upright. Checkpoint: leave a small gap between panels only if the connector design requires it; otherwise butt them close so no one can squeeze through. If the layout looks cramped on the floor, it will feel worse standing up, so adjust now.
- Stand the panels and check stability: Raise the panels one at a time, starting from the end that anchors the line. Press down on each base or foot to seat it firmly, then gently push the top corner of each panel to test for wobble. Common mistake: rushing this step and leaving a panel balanced on an uneven floor tile. If a panel rocks, reposition it rather than forcing it. A panel that moves when lightly pushed will move more when someone brushes past it.
- Check sightlines from both sides: Stand where a customer or visitor would stand, then stand where staff sit. Make sure the transparent panels cover the face-to-face zone without blocking your view of the room or the entrance. Adjust the angle of the end panels if you can still see straight past them. Checkpoint: the barrier should interrupt the direct path between people, not just sit nearby. Ask a colleague to walk the route and confirm they cannot step around the panels without noticing.
- Secure the ends and mark the final position: Once the layout works, note or mark the final floor positions so the panels can be returned to the same spot after cleaning or rearranging. If the set includes connectors or feet, fit them now according to the product instructions. Common mistake: skipping this step, then finding the panels drifted out of line after a week of daily use. Take a photo of the finished layout so anyone can reset it correctly.
Product facts
- Modularer Schutz Raumteiler FRAME XXL 4er-Set: The FRAME XXL set includes four transparent panels designed to help maintain distance where the recommended 1.5-meter rule is no longer feasible. Four panels give you enough coverage to close a wider gap or form an L-shape around a desk, rather than a single narrow screen.
Modularer Schutz Raumteiler FRAME XXL 4er-Set
